Kingpins & Bushes

Kingpin Bushes:

We offer both Standard and Over Size Phosphor Bronze Kingpin Bushes.

Over-size Bushes are required as a direct replacement for the Plastic Bushes used in the early 2000’s in Morgan Front Suspension you cannot use a normal Kingpin Bush because the Stub Axles were machined Oversized at the factory to accept the Plastic Bushes. Bushes are available individually or in pairs or sets to suit your needs.

Whilst rolling changes in production make dates hard to pin down the first plastic (Devol) Bushes started to appear in 2001 and the last to be fitted were around 2005, as always check before ordering! One clue is that Plastic Bush Cars normally have a plain top bolt in that it has neither Oiler Pipe or Grease Nipples fitted.

All our Kingpin Bushes are machined with a helical internal groove for improved lubrication, these Bushes are not Pre-Sized and therefore must be reamed to final size after installation.

Option are as follows:

Standard: MFST11

Oversized: MFST12

Hard Chrome King Pins:

Manufactured from hardened and ground Hard Chrome Rod.

In our opinion, the best and longest lasting solution for Morgan Kingpins, matches well with our Kingpin Bushes.

As fitted to many Road and Race cars.

Option are as follows:

Round Top Adjustable: MFST13

Flat Top Standard: MFST14

 

Oiler Bolts & Grease Nipples:

We manufacture Oiler Bolts from High Grade steel (EN24T) with Integral flange and tapped for 1/8 BSP grease nipples.

Supplied in Pairs:

Oiler Bolts: MFST15

Grease Nipples: MFST16

Brakes Brakes

Brakes

Radiators & Cooling Systems Radiators & Cooling Systems

Radiators & Cooling Systems

Steering & Suspension Steering & Suspension

Steering & Suspension

Fuel Tanks Fuel Tanks

Fuel Tanks

Axle & Transmission Upgrades Axle & Transmission Upgrades

Axle & Transmission Upgrades

Sumps & Oil Coolers Sumps & Oil Coolers

Sumps & Oil Coolers

Tools & Other Stuff Tools & Other Stuff

Tools & Other Stuff