300 mm vented disc kit
300 x 22 kit fitted
billet 4 stock discs
300 x 22 cross drilled with Billet 4 Calipers

Click images to enlarge

 

+4 Front Brakes 1992 on

+4 , fitted with the Lockheed calipers.

Note: This will not fit cars with 5-1/2" wide wheels  

The most popular upgrade for these is the 300mm vented conversion. These discs are 22mm thick and for everyday  road use will give all the braking performance needed.

A pair of 300mm ventilated discs, mounted to machined aluminium mounting bells, a set of custom made spacers for the calipers, a pair of new special caliper mounting brackets, and all the hardware to assemble

Alloy Wheel Cars 

Wire Wheel Cars 

 

As the calipers on some of these cars are now getting on for 20+ years old we can also offer a complete replacement front brake upgrade.

Consisting of the same 2 piece vented disc as above but with a pair of aluminium 4 piston calipers, brake pads and all necessary fittings

As supplied to the Morgan factory for the "Baby Doll" limited editions

 

Product options:

 

The rotors are normally supplied plain faced

Crossdrilling or grooving is an additional £40.00 per pair

Aeroquip braided steel brake hoses £44.00 for front hoses only or £60.00 including the rear hose

We can also offer a pair of replacement aluminium 4 piston calipers to suit the standard discs, should you not wish to change the discs

£414.00

 

Click images to enlarge

 

4/4 and +4 pre 1992

We commissioned Hi Spec to manufacture a caliper to replace the original fitment.

This was designed to keep the standard disc that is perfectly suitable for the size and weight of the car.

These new calipers are 4 piston and have a brake pad area nearly double the standard size.

 

Supplied with brake pads and Aeroquip hoses. 

 

Click images to enlarge

 

Lowering Blocks

Fitted between the axle saddle and the leaf spring.

Comes with new uprated axle U bolts.

Several heights available, contact us to discuss your requirements.

 

 

Jowett Jupiter LeMans Replica Fuel tank
Westfield Fuel Tank internals

Click images to enlarge

 

Fuel Tanks and Systems

For our range of Morgan fuel tanks  please choose from the menu on the left.

At Mulberry Fabrications we have fabricated many  fuel tanks in all shapes and sizes over the years.

From a road replacement tank in stainless steel for your vintage classic to a fully baffled and foam filled aluminium competition tank for your racecar.

All our race tanks are in aluminium and foam filled with FT3 FIA specification foam. 

All of our road fuel tanks are 1.2mm (18 SWG) stainless steel and baffled internally.

Please contact us with your reqirements

 

 

Click images to enlarge

 

+4 Front Brakes 2007 on

With the earlier incarnation of the +4  we were able to offer a spacer kit for the standard cast iron caliper to allow us to use a larger and thicker vented brake disc.

Unfortunately due to the construction and design of the later aluminium Caparo calipers, we cannot space them for a bigger disc.

So we offer complete replacement front brake upgrade.

Consisting of the same 2 piece vented disc as above but with a pair of aluminium 4 piston calipers, brake pads and all necessary fittings

As supplied to the Morgan factory for the "Baby Doll" limited editions

£780.00

 

Select a product category
  • Brakes
  • Steering & Suspension
  • Aluminium Radiators & Cooling Systems
  • Fuel Tanks and Systems
  • Oil Tanks & Systems
  • Tools
  • Other & miscellaneous